Öl-schwer-IN-loS

Referenzen

# 1 IOC 1995
# 2 OCC 1995
# 3 CFHT 1995

Metadaten

Datenqualität mittel (sekundäre/abgeleitete Daten)
Dateneingabe durch System
Quelle GTZ
Review Status kein Review
Letzte Änderung 10.08.2011 12:34:46
Sprache Deutsch
GUID {B11C62B4-A5B4-11D3-B42D-FED95173DC12}

Kenndaten

Kategorie Brennstoffe-fossil-Öl
variable Kosten: 0,0000000 €/kWh
energetische Wertigkeit 1,0000000
Wirkungsgrad des Referenzsystems 100,00000 %
spezifisches Gewicht 86,343876 kg/MWh
fossiler Energieträger
Emissionsfaktor CO2 269,707*103 g/MWh
Emissionsfaktor SO2 1,72512*103 g/MWh
Flüssiger Brennstoff
Dichte 1,0000000 kg/l
Heizwert: 41,693750 MJ/kg
Brennwert: 44,570000 MJ/kg
Kohlenstoff-Gehalt: 85,250000 %
Wasserstoff-Gehalt: 12,750000 %
Stickstoff-Gehalt: 200,00*10-3 %
Sauerstoff-Gehalt: 400,00*10-3 %
Schwefel-Gehalt: 1,0000000 %
Wassergehalt: 300,00*10-3 %
Asche-Gehalt: 100,00*10-3 %

Kommentar

Refineries normally use fuel oil with a low sulphur content of 1 wt% to re-duce the emissions of sulphur dioxide. The sulphur content of fuel oil ranges between 0.5 wt% and the maximum of 4.5 wt% pre-scribed by the standard. The specified ash content is less than 0.1 wt% and the water content is less than 1 wt%. The carbon content of fuel oil is 88 wt%. It has a lower heat-ing value of 41.72 MJ/kg (CFHT 1995; ISI 1988; IOC 1995; OCC 1995; SHARMA/SHARMA 1994/04). Ultimate analysis esitmated using #1, #2 and #3